*> > >
INSTALLATION DATA
Installation Indoor or Outdoor
Environment Industrial, Marine
Amb. Temperature Min/Max -25°C (CS) and -40°C (LTCS) , storage only / 60°C *
OPERATING CONDITIONS
Fluids Mineral and synthetic lubricating oils in a broad range of viscosities, Hydraulic oil, Diathermic oil, fluids with low or no lubricating power, food, cosmetics and detergents industries, fuels (HFO, LFO, LSMGO, IFO)
Solid content 2 mm (3%) MAX *
Viscosity range between 1 and 15000 cSt * *
Speed between 750 and 3600 rpm * *
Rotation (shaft view) clockwise standard; counter clockwise on request
TECHNICAL CHARACTERISTICS
Design available STANDARD SEIM, API676 IIIED, API676 IIED, BV Mode II, RINA
Flow rate between 10 and 10000 lpm (between 0.6 and 600 m3/h; between 2.7 and 2641.8 GPM) *
Suction pressure between -0.5 and 5 barg (between -8 and 73 psi) *
Delivery pressure 10 barg (146 psi) MAX *
Operating temperature between 0 and 300 °C *
Seal Single or Double Mechanical
Bearing 2 radial + 1 axial
Bearing lubrication Based on the application
Drive AC or DC motor, Steam turbine, diesel engine
Construction shape Horizontal or vertical on feet IM1001 B3
Construction shape Horizontal or vertical
IN/OUT DIN UNI EN1092-1, ANSI150 B16.5
Safety valve It is ONLY possible to install a built-on safety valve with internal or external recirculation on request
MATERIALS
Body/Flange Carbon steel or Stainless steel *
Set of 3 screws Nitrided carbon steel or stainless steel * *
Liner Cast iron GG25; carbon steel; stainless steel
O-rings standard Viton ® Viton ®
Painting standard SA2,5 + primer + final, total 160µ approximately; other painting cycles on request
(*) For different values contact SEIM