*> >
INSTALLATION DATA
Installation Indoor or Outdoor
Environment Industrial, Marine
Amb. Temperature Min/Max -25°C (CS) and -40°C (LTCS) , storage only / 60°C *
OPERATING CONDITIONS
Fluids Mineral and synthetic lubricant oils in a broad range of viscosities, Hydraulic oil
Solid content 0% *
Viscosity range between 5 and 2500 cSt *
Speed between 750 and 3600 rpm *
Rotation (shaft view) clockwise standard; counter clockwise on request
TECHNICAL CHARACTERISTICS
Design available STANDARD SEIM, API676 IIIED, API676 IIED
Flow rate between 10 and 10000 lpm (between 0.6 and 600 m3/h; between 2.7 and 2641.8 GPM) *
Suction pressure 10 barg (146 psi) MAX *
Delivery pressure 40 barg (581 psi) MAX *
Operating temperature between 0 and 300 °C *
Seal Single or Double Mechanical
Bearing 4 radial + 1 axial
Bearing lubrication pumped fluid
Drive AC or DC motor, Steam turbine, diesel engine
Construction shape Horizontal or vertical on feet IM1001 B3
IN/OUT standard ANSI 150 B16.5 or DIN UNI EN 1092-1
Safety valve Carbon steel or Stainless steel
MATERIALS
Body/Flange Nitrided carbon steel or stainless steel *
Set of 3 screws Nitrided carbon steel or stainless steel * Liner Cast iron GG25; carbon steel; stainless steel standard Viton ® *
O-rings standard Viton ®
Painting standard SA2,5 + primer + final, total 160µ approximately; other painting cycles on request
(*) For different values contact SEIM